REMANUFACTURED 10 x 36 NORTON MODEL "CTU" PLAIN CYLINDRICAL GRINDER

REMANUFACTURED 10 x 36 NORTON MODELCTU PLAIN
CYLINDRICAL GRINDER
Remanufactured 2002
S/N 23424

STANDARD CATALOG SPECIFICATIONS
Nominal lengths.................................... 36
Maximum swing........................... 10 31/32
Nominal swing....................................... 10
Maximum diameter work ground with 30 wheel........ 10
Grinding wheels
Standard..........................................30 x 3 x 12
Wheel and work center distances, maximum........ 21
...............................................minimum......8 1/4
Coolant tank capacity, U.S. gallons......................75
Coolant pump capacity, gallons per minute...........21
Hydraulic oil reservoir capacity U.S. gallons......... 38
Lubricating oil reservoir capacity U.S. gallons....3 1/2
Steady rest, maximum work diameter accommodated.... 4 5/8
Swivel table adjustment (in/per/ft/on dia.)
Machine length................................................. 36
Maximum Taper.............................................2 1/2

HEAD STOCK
Spindle diameter................................... 4 1/8
Center diameter.................................... 1 3/4
Center taper................................ No. 14 Jarno
Work speed, AC motor...... 50, 80,125, 200 RPM
Work speed, DC motor................ 30 ‑ 275 RPM

FOOT STOCK
Spindle diameter................................... 2 3/4
Center diameter.................................... 1 3/4
Center taper................................No. 14 Jarno

BASE WAYS
Width of flat way...................................... 2 1/2
Width of V‑way, projected......................... 2 1/2
Lubrication...................................Automatic pressure

WHEEL SLIDE
Length of bearing ways............................. 37 3/8
Width of flat way........................................ 5 5/8
Width of V‑way, projected........................ 4 11/32
Overall width of ways, projected................. 20 5/8
Total bearing area, projected.................... 372 sq. in.
Lubrication...................................Automatic pressure
Automatic rapid advance stroke, max.................... 4

WHEEL SPINDLE
Material............................Heat treated alloy steel
Large bearing (LH).................. 3 1/2x 8 5/16
Small bearing (RH).................. 3 1/4x 7 1/8
Number of speeds ................... 3
Diameter of pulleys................. 14 1/8‑1115/16‑9 9/16
Drive from motor ................... 7 V‑belts
Lubrication.........................Automatic flood
Reciprocation(when supplied)....... 0‑3/8

TABLE SPEEDS
Range of speed IMP.................................2 ‑ 240
Number of speeds................................... Infinite

MOTORS
Work drive........................................ 3/4 HP
Wheel drive....................................... 15 HP
Hydraulic and lubrication oil pump

EQUIPPED WITH
Plunge cycle
Hydraulic table travel
L R Hand tarry
Dwell
Timer
Tailstock dresser

* This machine has been completelyre manufacturedto new exacting tolerances. G.C.H. offers a one year warranty all parts.

Specifications are deemed accurate, however, subject to verification or prior sale.
All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within 30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.