CINCINNATI 12 x 48 2U3E1M-13

12 x 48 CINCINNATI UNIVERSAL CYLINDRICAL GRINDER

S/N 2U3E1M-13

SPECIFICSPECIFICATIONS
Maximum swing overtable……………………………………………… 12 15/16
Maximum diameter machine willgrind with:
Full size wheel……………………………………………………………14
Minimum diameter machine willgrind with:
Either full size or worn outwheel...……………………………………… 0
Nominal distance betweencenters...………………………….………….. 48
Distance from floor tocenters……...…………………………………….. 42 1/4
Swivel table graduated toangle of:
Toward wheelhead………………………………………………..……... 10 degrees
Away from wheelhead………………………………………..……..…… 3 degrees
Swivel table graduated totaper per foot of:
Toward wheelhead…………………………………………………….… 4 1/2 degrees
Away from wheelhead…………………………………………………... 1 1/4 degrees

STANDARDCATALOG SPECIFICATIONS
Swivel range: (lower swivel,right left).…………………………….…. 90 degrees
(upper swivel, right left)……………………………….… 30 degrees
Grinding wheel (dia. x face.x hole)………………………………….….. 14 x 1.5 x 5

CROSSFEED
Automatic in feed at tablereversal
Diameter reduction…………….(low)…………………………….…..….0002 to .005
(high)……………………………..……. .005to .0125
Wheel head movement per turnof cross feed
Hand wheel……………………(low)…………………………………….050
(high)……………………………………. .250”

HEAD STOCK FOOTSTOCK
Taper hole in head stock foot stock spindles……………………..…. #9 B S
Number of work rotationspeeds……………………………………….. Variable
Head stock spindle nose,American lathe standard……………………... 5
Head stock swivel: (towardwheel head)………………………………... 90 degrees
(away from wheel head)……….…………………… 30 degrees

TABLE
Number of table traversespeeds………………………………………… Infinite
Range of table traversespeeds (in per min)……………………………... 3 – 240
Minimum movement required toreverse table….………………….…… 3/32
Accuracy of table reversal atall traverse rates…..………………..…….. .004
Independent right hand andleft hand tarry, seconds……...…………..…. 0 to 5
Mechanical hand tabletraverse per revolution of hand wheel:
Rapid…………………………………………………………….………15/16
Slow………………………………………………………………..…….0.2

POWERREQUIREMENTS
(Electrical equipmentincluded with machine)
Wheel headmotor…………………………………….. 7 1/2 HP – 1730 RPM220/440
Hydraulic pumpmotor…………………………………………….……. 1 HP
Head stock motor…………………………..……………………….……3/4 HP
Cutting fluid pumpmotor…………………………………………..…… 1/4 HP

EQUIPMENT FEATURES
Lever operated tail stockwith truing attachment.
Left and right tarry at endof table stroke.
Self contained coolant andhydraulics.
Traverse.
Vari speed head stock.
Tail stock dresser.
Attached electrical.
2-Axis DRO.
Rebuilt by GCH in 2012.

G.C.H. has many Universal’savailable in stock, as well as replacement parts for these machines. If this machine does not fit your needs,please don’t hesitate to ask your salesperson about others.

Specificationsare deemed accurate, however, subject to verification or prior sale.

All exchangeunits/returns must be shipped within 30 days. All exchange units/returns mustbe shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery,is not responsible for any customs formalities or shipping costs.

If Grinders ClearingHouse, Inc. dba GCH Machinery does not receive exchange/core unit back within30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.