18A2 BLANCHARD TWO-SPINDLE AUTOMATIC SURFACE GRINDER

18A2 BLANCHARD TWO-SPINDLE AUTOMATIC SURFACE GRINDER
Job # 5735

STANDARD SPECIFICATIONS

Range
7 Diameter x 4 3/8 high on magnetic chuck.

Work Table
Blanchard one-piece steel magnetic chuck, single-pass type, 40 outside diameter, 26 inside diameter. Chuck uses direct current only.

Grinding Wheel
18 Diameter x 5deep x 10 hole (18 x 5 x 10) usable depth 4.

Speeds
Wheel………………………………… 1200 RPM on 60 cycle 1000 RPMon 50 cycle
Chuck: Fixed speed easily changed with pick-off gears from .42 to .88 RPM. Higher and lower ranges are available when required.

Feed
Each wheel head has vertical down feed by hand or power, with power down feed controlled by a separate wheel control caliper for each grinding head.Each wheel head has motor-driven raising and lowering with push-button control.

Standard Equipment
Two 30 HP foot-type spindle motors mounted on wheel heads; one 2 HP motor mounted on base for table rotation; two 3/4 HP traverse motors, two 1/4 HP feed motors. 40 single pass magnetic chuck or 43plain table. Water-guards, piping,coolant discharge chute. Two wheel control calipers, two ammeters wired in wheel motor circuits. Control panel containing line start contactors with thermal overload protection for all motors, with 115 volt control circuit.

Hand Loading Type
Loading shelf, adjustable unloader and chuck cleaning device.

Dial Loading Type
Dial and driving mechanism, adjustable work guides, adjustable unloader and chuck cleaning device.

EQUIPMENT FEATURES
Wheel control calipers for each head.
Part discharge chute with demagnetizer.
Wheel truing unit for each head.
External coolant unit.

Specifications are deemed accurate, however, subject to verification or prior sale.
All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within 30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.