325-12 CINCINNATI CENTERLESS GRINDER

325-12CINCINNATICENTERLESS GRINDER
S/N350412H5U-0008

STANDARD CATALOG SPECIFICATIONS

CAPACITY(Work rests or bar grinding fixtures are not standard equipment.)
Standard thru feed in feed work rests……………………………. 1/2 to 3dia.
Maximum work diameter…………………………………………… 6
(Depending on which work rest is ordered)

WHEELS (Not included In price)
Grinding wheel……………………………………………. 12 Hole, 8-12 Widths
...............................…………………………………………24 Max. dia., 16 Min. dia.
Regulating wheel………………………………………….. 6 Hole, 8-12 Widths
...............................…………………………………………14 Max. dia., 10 1/4 Min. dia.
GRINDING WHEEL SPINDLE
High grade alloy steel, heat treated, titanium dioxide coated and ground.
Filmatic bearings self-adjusting for variations in load with plain thrust bearing in center.
Automatic circulating lubrication under pressure.

REGULATING WHEEL SPINDLE
High grade alloy steel, heat treated, titanium dioxide coated and ground.
Two piece bronze front and rear bearings, anti-friction radial and thrust bearing on end.
Automatic pressure lubrication.

REGULATING WHEEL SPEEDS
Number……………………………………………….Infinite
Range…………………………………………………60 cycle: 11 to 300RPM
...............................…………………………………....50 cycle: 12 to 315RPM
Low range…………………………………………….60 cycle: 11 to 56RPM
...............................……………………………....……50 cycle: 12 to 59RPM
High range…………………………………………... 60 cycle: 56 to 300RPM
...............................…………………………...………50 cycle: 59 to 315RPM
GRINDING WHEEL DRIVE
Enclosed motor on end of machine………………… 25 HP
Constant speed, NEMA dimensions……………….. 50 - 60 cycle, 3 phase
208 or 575 single; 230/460 dual voltage
AC drives grinding wheel only.
Power transmission…………………………………. 8 V-belts

REGULATINGWHEEL DRIVE
Motor mounted on upper slide……………………… 60 cycle: 2 HP @ 1200RPM
...............................……………………………………50 cycle: 2 HP @ 1500RPM
Constant speed, NEMA dimensions………………… 50 or 60 cycle, 3 phase
...............................……………………………………208 or 575 single; 230/460 voltage AC
Power transmission…………………………………… 8 V-belt chain
Speed changes………………………………………… Variable pitch sheaves and gear shift

CUTTING FLUID EQUIPMENT
Individual motor driven cutting fluid pump capacity 30GPM
Cutting fluid tank capacity……………………………… 75 gallons

WHEEL TRUING
Independent truing units for each wheel.
Hydraulic diamond truing for grinding and regulating wheels.
Diamond not included as standard equipment.

SIZING ADJUSTMENT
Accurate adjustment of regulating wheel slide by in feed hand wheel graduated in fifty millionths of an inch.

FEATURESANDEQUIPMENT
Gibbed upper and lower slides.
Non-balancer grinding wheel.
Standard transmission.
Attached electrical panel.
Rear hand wheel.

FLOOR SPACE WEIGHT
Floor space……………………………………………… 95 1/4 x 140 3/8
Weight……………………………………………………20,000 lbs.

Specifications are deemed accurate, however, subject to verification or prior sale.
All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.