18 x 36 CINCINNATI UNIVERSAL CYLINDRICAL GRINDER

18 x 36 CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
S/N 3U6D5R-1 Year:1969

STANDARD CATALOG SPECIFICATIONS
Swing.............................................................. 18
Distance between center.............................................36
Swivel range (lower swivel, right left)............................90 degrees
(upper swivel, right left).............................30 degrees
Grinding wheel (dia. x face x hole)...........................14 x 11/2 x 5

CROSS FEED
Automatic in feed at table reversal:
Diameter reduction........ (low)...................... .0002 to.005
(high)......................0005 to .0125
Wheel head movement per turn of cross feed:
Hand wheel............(low)...................... .050
(high)...................... .250
Minimum in feed increment in terms of:
Diameter reduction..............00005

HEAD STOCK FOOT STOCK
Taper hole in head stock foot stock spindles..................#9 B S
Number of work rotation sp...............................Variable
Head stock spindle nose, American lathe standard...................5
Head stock swivel: (toward wheel head)............................90 degrees
(away from wheel head).....................30 degrees

TABLE
Number of table traverse speeds........................... Infinite
Range of table traverse speeds(in per min).....................…... 3 - 240
Minimum movement required to reverse table.................... 3/32
Accuracy of table reversal at all traverse rates..................….... .004
Independent right hand and left hand tarry, seconds................... 0 to 5
Mechanical hand table traverse per revolution:
of hand wheel.................. (Rapid)....................15/16
(Slow).......................0.2

POWER REQUIREMENTS
(Electrical equipment included with machine)
Wheel head motor..............................3 HP - 1730 R.P.M. 220/440
Hydraulic pump motor...........................1 HP
Head stock motor..............................3/4 HP
Internal grinding attachment motor……….. 2 HP - 3750 R.P.M
Cutting fluid pump motor........................1/4 HP

SPECIFIC SPECIFICATIONS
Maximum diameter machine will grind with:
Full size wheel........................12 15/16
Minimum diameter machine will grind with:
Either full size or worn out wheel......................0
Nominal distance between centers..................36
Distance from floor to centers.........................42 1/4
Swivel table graduated to angle of:
Toward wheel head.............................10 degrees
Away from wheel head.............................3 degrees
Swivel table graduated to taper per foot of:
Toward wheel head................................4 1/2 degrees
Away from wheel head...................1 1/4 degrees

EQUIPMENT FEATURES
Lever operated tail stock with truing attachment.
Left and right tarry at end of table stroke.
Self contained coolant and hydraulics.
Auto pick feed.

Specifications are deemed accurate, however, subject to verification or prior sale.
All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.