CINCINNATI 18 x 48 UNIVERSAL 35326E5V-0018

18 x 48 CINCINNATI UNIVERSAL GRINDER
S/N35326E5V-0018 Year: 1970
STANDARD SPECIFICATIONS
Maximum swing over table…………………………………………….. 18 15/16”
Maximum diameter machine will grind with full size wheel…………...18 15/16”
Minimum diameter machine will grind with either full size or
worn out wheel………………………………………………………….. 0
Nominal distance between centers……………………………………... 48”
Distance from floor to centers………………………………………….. 44 3/8”
Swivel table graduated to angel of - toward wheel head……………….. 9 DEGREE
- away from wheel head…………...2 DEGREE
Swivel table graduated to taper per foot of - toward wheel head…….... 3 3/4
- away from wheel head.… 1”
Floor space required…………………………………………………… 72 3/4” x 184 1/4”

GRINDING WHEEL HEAD
Swivel range - (lower swivel), right and left…………………………. 90 DEGREE
- (upper swivel), right and left…………………………. 30 DEGREE
Grinding wheels regularly supplied (diameter x face x hole)………… 14” x 2 x 5”

CROSS FEED
Automatic in feed at table reversal (diameter reduction) -low……….. .0002” to .005”
- high………. .0005” to .0125”
Wheel head movement per turn of cross feed hand wheel -low……... .050”
- high…….. .025”
Minimum in feed increment in terms of diameter reduction………….. .00005”

HEAD STOCK AND FOOT STOCK
Taper hole in head stock and foot stock spindles…………………………No. 10 B S
Number of work rotation speeds…………………………………………. Infinite
Range of work rotation speeds…………………………………………… 25 to 200 RPM
Head stock spindle nose, American Lathe Standard……………………..6”
Head stock swivel - toward wheel head…………………………………. 90 DEGREE
- away from wheel head……………………………... 30 DEGREE
TABLE
Number of table traverse speeds………………………………………… Infinite
Range of table traverse speeds, inches per minute……………………… 3 to 220
Minimum movement required to reverse table…………………………. 3/32”
Accuracy of table reversal at all traverse rates…………………………...004”
Independent right hand and left hand tarry, seconds…………………….0 to 5
Mechanical hand table traverse per revolution of hand wheel- rapid….. 15/16”
- slow…… .02”

POWER REQUIREMENTS (Electrical equipment included with machine)
Wheel head motor………………………………………………………. 5 HP
Hydraulic pump motor………………………………………………….. 1 1/2 HP
Head stock motor……………………………………………………….. 1 HP
Internal grinding attachment motor…………………………………….. 2 HP
Cutting fluid pump motor………………………………………………. 1/4 HP

EQUIPPED WITH
Swing down internal grinding spindle.
Tarry left right.
Pick feed.
Live dead center head stock.
Attached upgraded electrical panel.
Coolant in base.
Tail stock dresser.
10” 4 Jaw chuck.
Variable speed head stock.

Specifications are deemed accurate, however, subject to verification or prior sale.

All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within 30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.