18 x 72 3R LANDIS UNIVERSAL CYLINDRICAL GRINDER

18 x 72 3R LANDIS UNIVERSAL CYLINDRICAL GRINDER

S/N 796-65Year: 1969

STANDARD CATALOG SPECIFICATIONS
Nominal work swings............................. 18
Nominal distances between work centers.......... 72
Maximum work swing diameter standard machine
will grind with full size standard wheel........ 19 1/4
Minimum diameter wheel to grind zero diameter
work on centers................................. 9 1/4
Swivel table graduated (inches per foot)........ 3
Swivel table graduated (degrees included angle). 14�
Coolant tank capacity, gallons.................. 40
Hydraulic tank capacity, gallons................ 25 1/2
Height from floor to work center line............ 45 1/4

WORK CARRIAGE
Traverse speed, inches per minute............... 2 to 240
Traverse per turn of hand wheel -slow.......... 0.100
- fast.......... 0.750
Center rest capacity............................ 1 - 7
Work rest capacity.............................. 1/2 - 7

WHEEL HEAD WHEEL FEED
Grinding wheel size............................. 14 x 1 1/2 x 5
Grinding wheel head swivel range- upper........ 180 Deg.
-lower........ 60 Deg.CW
30 Deg.CCW
Grinding wheel spindle speeds, RPM.............. 1720-2185
Automatic in feed at table reversal on dia....... 0.0002 to
0.004
Maximum distance wheel center line to work
center line.....................................17
Minimum distance wheel center line to work
center line.....................................3
Work diameter reduction per revolution of
hand wheel.....................................0.100
Work diameter reduction per revolution of
fine feed knob (Hydraulic In feed Machines)..... 0.005
Maximum hydraulic feed on diameter for
hydraulic in feed machines......................0.090
Rapid in feed stroke for hydraulic in feed
machines...................................... 1

HEAD STOCK FOOT STOCK
Head stock work center.......................... #14 Jarno
Foot stock work center.......................... #10 Jarno
Foot stock center movement by................... Lever hand wheel
Work speeds RPM - Low Range....................12 to 72
- High Range...................60 to 360
Diameter hole through head stock spindle........ 1 7/16
Head stock swivel range......................... 120 Degrees
Head stock spindle nose......................... 6A-2

ELECTRIC MOTORS
Wheel drive motor.............................. 5 HP
Work drive motor............................... 3/4 HP
Hydraulic oil pump generator drive motor..... 2 HP
Internal fixture motor......................... 1 HP
Coolant pump motor............................ 1/3 HP
Internal fixture motor........................ 2 HP
Wheel spindle lubrication pump motor........... 1/4 HP
Floor space required...........................78 x 169
Weight of machine, net.........................10,900 lbs.

EQUIPMENT FEATURES
Swing down internal grinding attachment.
Hydraulic table travel.
Tarry left right.
Incremental feed on table traverse.
Table dresser.
Coolant in base.

Specifications are deemed accurate, however, subject toverification or prior sale.
All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.