174 HEALD GAP INTERNAL GRINDER

174 HEALD GAP INTERNAL GRINDER
S/N 41315

STANDARD SPECIFICATIONS

CAPACITIES
Swing inside standard chuck guard, diameter…………………….. 44
Maximum diameter on hole that can be ground…………………. 20
Maximum grinding stroke…………………………………………........... 13
Maximum length of hole that can be ground depends on the
nature of the work.Refer details toWorcester.
Gap adjustment (standard)………………………….. ……………11 1/2 to 20
Center of spindle from motor……………………………………............ 48 1/4
Work head cross slide travel……………………………………… 6 front, 6rear
Diameter of work head spindle flange……………………………............ 12
Hole through work head spindle………………………………….. 1 11/16

SPEEDS AND FEEDS
Table speed unlimited between……………………………......……… 0-18 FPM
Work head speeds…………………………………………...... 41-62-82-123 RPM
Cross feed dial graduation represents on diameter of work……….001
Power feed adjustment……………………………………………....... 1 to 6 teeth
Each ratchet tooth with coarse gears(standard)……………...……..0002
Each ratchet tooth with fine gears(optional)……………………... 000138

DRIVE
Pump drive motor (60 cycle-AC)………………………….............. 2 HP 1200 RPM
Work head motor (60 cycle-AC)…………………………. 600-900-1200-1800 RPM
Wheel head motor (60 cycle-AC)…………………………........ 7 1/2 HP 3600 RPM
Coolant pump motor (60 cycle-AC)……………………….......... 1/2 HP 1800 RPM

GENERAL DATA
Capacity of oil reservoir…………………………………….. 35 gal
Capacity of coolant tank…………………………………… 125 gal
Length and width of base on floor………… 115 x 361/2
Floor space (total) without coolant tank……. 139 x 82
Weight of machine (net)……………………………… 16,690 lbs.
Weight if machine (box)………………19,700 lbs. 670 cu ft.
Weight of machine (crated)………… 19,175 lbs (8700 kg)
Weight of pump and tank (boxed)…….400 lbs. 24 cu ft.

EQUIPPED WITH
42” face plate.
Plunge feed.
Face stop.
Manual power table.
Single point dresser.
Attached electrical.

Specifications are deemed accurate, however, subject to verification or prior sale.

All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within 30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.