10 x 30 NORTON LC5 PLAIN CYLINDRICAL GRINDER

Ref: UEDG4706PRIVATE

10 x 30 NORTON LC5 PLAIN CYLINDRICAL GRINDER

S/N 28247 Year:1967

STANDARD CATALOG SPECIFICATIONS
Nominal lengths....................................30
Nominal swing...................................... 10
Maximum diameter work ground with 24 wheel........ 10
Wheel and work center distances- maximum.......... 21
-minimum.......... 8 1/4
Hydraulic oil reservoir capacity U.S. gallons...... 38
Lubricating oil reservoir capacity U.S. gallons.... 3 1/2
Swivel table adjustment(in/per/ft/on dia.)
Machine length..................................... 48
Maximum taper...................................... 48
Maximum taper(degrees)............................ 4 3/4

HEAD STOCK
Spindle diameter................................... 4 1/8
Center diameter.................................... 1 3/4
Center taper....................................... No. 14 Jarno
G.E.Motor............................... Vary speed 690-2760 RPM

FOOT STOCK
Spindle diameter................................... 2 3/4
Centerdiameter.................................... 1 3/4

BASE WAYS
Width flat way................................2 1/2
Width of V-way,projected..................... 2 1/2
Lubrication...................................Automatic pressure

WHEEL SLIDE
Length of bearing ways........................ 37 3/8
Width of flat way.............................5 5/8
Width of V-way,projected..................... 4 11/32
Lubrication...................................Automatic pressure
Automatic taped advance stroke,max........... 4

WHEEL SPINDLE
Wheel spindle..................7.5 HP
Material.......................Heat treated alloy steel
Large bearing (LH).............3 1/2 x 8 5/16
Small bearing (RH).............3 1/4 x 7 1/8
Number of speeds...............3
Diameter of sheaves............14 1/8-11 15/16-9 9/16
Lubrication....................Automatic flood

TABLE SPEEDS
Range of speed IMP............................ 2 - 240
Number of speeds.............................. Infinite

SHIPPING SPECIFICATIONS
Approximate weight............................ 10,000 lbs.

EQUIPPED WITH
Head stock (dead center) left and right dwell.
Tail stock (lever operated).
Hand and hydraulic table traverse.
24 Diameter x 4 wide wheel capacity.
Coolant in base.
Attached electrical panel.
Table dresser.
Left right tarry.
Plunge.
Shoulder grind set up.
Pick feed.

Specifications are deemed accurate, however, subject to verification or prior sale.