BLANCHARD 18-36 8274

18-36 BLANCHARD HIGH POWERED VERTICAL ROTARY SURFACE GRINDER

S/N 8274Year: 1956

STANDARD CATALOGSPECIFICATIONS

RANGE
36 diameter x 12high over 36 chuck with new cylinder wheel ‑ 11 high with Blanchardsegment wheel.

WORKTABLE
PRIVATE Blanchard one‑piece steel magnetic chuck, 36 diameter with 5/8pole spacing. Chuck has 2 centerhole and nineteen 3/8 tapped holes in 36 chuck. Maximum weight of work load 3,000 lbs.tc� \l 1Blanchard one‑piece steel magnetic chuck, 36\ diameter with5/8\ pole spacing.� Chuck has2\ center hole and nineteen 3/8\ tapped holes in 36\chuck.� Maximum weight of work load 3,000lbs.

SPEEDS
Wheel: 720 R.P.M. on 60 cycle; 750 R.P.M. on 50cycle
Chuck: 6, 9, 12, 18, 25, 33 R.P.M.
(On 50 cycles chuck speeds are 5/6 ofthese.)

FEED
Verticaldown feed of wheel by hand or power.
PRIVATE Power feed: On 60 cyclesapproximately .004 to .080, and on 50 cycles approximately .003to .066 per minute with accuratetc� \l 1 Powerfeed\:� On 60 cycles approximately.004\ to .080\, and on 50 cycles approximately .003\ to.066\ per minute with accurate
automatic stop. Maximum distanceof down feed before stop operates is one turn of dial, .100. Wheel head has rapid power
rising and lowering,interlocked with feed.
WATER SUPPLY
Easycleaning tank in base, capacity 150 gallons.
Motor driven centrifugalpump submerged in tank, 1 1/2 discharge pipe, 60 gallons per minute,supplying water inside the wheel and to outside nozzle through 1 pipes.

CURRENT FOR MAGNETIC CHUCK
36diameter: 110 volts, D.C. 7.2 amps, 792 watts
220 volts, D.C. 3.5 amps, 792 watts

FLOOR SPACE HEIGHT
Length9'3, width 4'11 including control cabinet.
Maximumheight 7'7, minimum 6'9.
Heightof chuck from floor 35.

WEIGHT
11,800lbs.

EQUIPMENT FEATURES
36 Blanchard one piecesteel magnetic chuck.
35H.P. 220/440 3 60 cycle head motor.
Waterguards.
Coolantin base.
18 9Piece Segmented chuck.
12Vertical.

Specifications are deemed accurate, however, subject to verification orprior sale.

All exchange units/returns mustbe shipped within 30 days. All exchange units/returns must be shipped using DDPterms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible forany customs formalities or shipping costs.

If Grinders Clearing House, Inc.dba GCH Machinery does not receive exchange/core unit back within 30 days, GCHwill invoice FULL replacement cost (OUTRIGHT Cost) to customer.

NOTE: Due to risingcosts partly by unsteady pricing in purchased goods and supply chain issues,this quote is good for 30 days. Prices are subject to change, pleasecontact us to confirm prior to issuing an order.