Used 1982 LANDIS 1R 6 X 18 | GRINDERS, CYLINDRICAL - PLAIN

6" x 18" 1R LANDIS PLAIN CYLINDRICAL GRINDER
S/N T883-47    Year: 1982
STANDARD CATALOG SPECIFICATIONS
Nominal work swing................................. 6"
Nominal distances between work centers............. 18"
Maximum diameter work standard machine will grind
with full size standard wheel...................... 6 7/8"
Minimum diameter wheel to grind zero diameter work on
centers............................................ 10 1/2"
Floor space required .............................. 106" x 50"
Coolant tank capacity   gallons ................... 19
Hydraulic tank capacity   gallons ................. 9 1/4
Height from floor to work centerline .............. 39 3/4"
WORK CARRIAGE
Traverse speed   inches per minute ................ 2" 240"
Carriage traverse per turn of hand wheel .......... 0.200"
Swivel table graduated   inches per foot........... 4"
Degrees included angle ............................ 20
Work rest capacity ................................ 1/4" 2"
HEAD STOCK & FOOT STOCKHead stock work center ............................ #10 Jarno
Foot stock work center ............................ #6  Jarno
Head stock swivel range ........................... 60, 90, 150
Work speeds   RPM ................................. 225, 400, 600
Diameter hole through spindle ..................... 1"
Head stock spindle nose ........................... 5A2
WHEEL HEAD & WHEEL FEED
Grinding wheel size   (standard)................... 16" x 1" x 15"
Grinding wheel   maximum width.......................... 3"
Grinding wheel spindle speeds   RPM..................... 1500/1900
Grinding wheel, minimum diameter of worn wheel.......... 9 1/2"
Maximum distance wheel centerline to work centerline
for machines with hand wheel feed ...................... 11 1/2"
for machines with hydraulic infeed ..................... 12 1/2"
Minimum distance wheel centerline to work center
line with foot stock removed ........................... 3 1/2"
Work diameter reduction per revolution of wheel feed
hand wheel.............................................. 0.100"
Work diameter reduction per revolution of fine knob..... 0.001"
Minimum feed graduations   on diameter ................. 0.000050"
Maximum hydraulic infeed on diameter for hydraulic
infeed machines......................................... 0.090"
Rapid infeed stroke for hydraulic infeed machines....... 1"
ELECTRIC MOTORSWheel drive motor.................................. 5 HP 1735 RPM
Work drive motor........................................ 1/4 HP
Wheel spindle lubrication motor ..................... ... 1/4 HP
Coolant pump motor...................................... 1/10 HP
Hydraulic pump motor for machines with hydraulic
traverse ............................................... 1 HP
WEIGHTSMachine with hand traverse and hand wheel feed ......... 3,750
Machine with hydraulic traverse and hand wheel feed..... 4,050
Machine with hand traverse and hydraulic infeed......... 4,000
Machine with hydraulic traverse and hydraulic infeed.... 4,150
EQUIPMENT & FEATURES
Auto plunge cycle.
Hydraulic table travel.
Bijur lube.
L.H. & R.H. Tarry.
Hand traverse.
Table dogs.
Coolant tank & pump.
Specifications are deemed accurate, however, subject to verification or prior sale.