10 x 24 2RU LANDIS UNIVERSAL CYLINDRICAL GRINDER

10 x 24 2RU LANDIS UNIVERSAL CYLINDRICAL GRINDER
Remanufactured 2005

S/N 197-4

STANDARD CATALOG SPECIFICATIONS

CAPACITY
Maximum swing over table........................... 10 15/16
Nominal distance between centers................... 25 9/16
Swivel table graduated to an angle of:
Toward wheel head.................................. 8 Degrees
Away from wheel head...............................3 Degrees
Swivel table graduated taper per foot:
Toward wheel head.................................. 4 1/2
Away from wheel head............................... 2

GRINDING WHEEL HEAD
Grinding wheels regularly supplied:
(Diameter x Face x Hole)...........................12 x 2 x 3
Swivel range: Lower swivel, right left........... 220 Degrees
Upper swivel, right left........... 180 Degrees

HEAD STOCK FOOTSTOCK
Head stock spindle taper...........................Jarno No. 10
Foot stock spindle taper........................... Jarno No. 6
Number of work rotation speeds..................... Infinite
Range of work speeds............................... 30 to 600RPM
Head stock spindle nose(American Lathe Std)....... 5

MISCELLANEOUS
Number of table traverse speeds.................... Infinite
Range of table traverse speeds in/per/min.......... 3 to 280
Accuracy of table reversal at all traverse rates... .001
Table tarry adjustment -Infinite (LH RH)........ 0 to 5 Sec
Mechanical hand table traverse:(Rate per revolution at
hand wheel) Slow:....1/10 Rapid................ 1
Distance from floor to work centers................ 46 1/2
Automatic in feed at table reversal:(Diameter reduction)
Minimum................0001 Maximum............ .0025
Minimum movement necessary to reverse the table.... 1/16
Wheel head movement per turn of hand wheel:
Minimum................0005 Maximum............ .050
Minimum in feed increment in terms of diameter reduction:
....................................................0001

POWER REQUIREMENTS
Wheel head motor ..... 3 HP Head stock motor...... 1/3 HP
Wheel head motor...... 1760 R.P.M.
Hydraulic pump motor.. 2 HP Coolant pump motor.... 1/8 HP

EQUIPPED WITH
Hydraulic traverse table.
Swing down internal attachment.
R.H. L.H. Tarry.
Traverse rate.
In base coolant pump.
1 Shot lube.

FLOOR SPACE REQUIRED......................... 59 1/2 x 144 1/2
WEIGHT.......................................4,900 Lbs.

* Please note all specifications are approximate. A great investment to your Tool Room or Production floor!

Specifications are deemed accurate, however, subject to verification or prior sale.
All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.