CINCINNATI 24X120 66-428D632

24 x 120 CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
PRIVATE
S/N 66-428D632 Year:1966

STANDARD CATALOG SPECIFICATIONS
Maximum swing over table........................... 24
Maximum diameter machine will grind with
full size wheel............................................. 24
Nominal distance between centers............... 120
Distance from floor to centers.................. 44 3/8
Swivel table graduated to angle of:
Toward wheel head............................. 7 degrees
Away from wheel head........................ 2 degrees
Swivel table graduated to taper per foot of:
Toward wheel head........................................ 3
Away from wheel head................................... 1

GRINDING WHEEL HEAD
Swivel range: Lower swivel, right and left........ 90 degrees
Upper swivel, right and left............... 30 degrees
Grinding wheels regularly supplied:
Diameter x face x hole...................... 14 x 2 x 5
CROSS FEED
Automatic infeed at table reversal (diameter reduction)
Low.........0002 to .005High............ .0005 to .0125
Wheel head movement per turn of cross feed hand wheel
Low.........050 High.............250
Minimum infeed increment in terms of diameter reduction
...............................................00005

HEAD STOCK FOOT STOCK
5.5”Through hole in head stock
Number of work rotation speeds........................... Infinite
Range of work rotation speeds, RPM................. 50 TO 500
Headstock swivel ‑ toward wheel head.............. 90 degrees
Headstock swivel ‑ away from wheel head......... 30 degrees

TABLE
Number of table traverse speeds.................... Infinite
Range of table traverse speeds, (in. per min.)..... 3 to 240
Minimum movement required to reverse table.......... 3/32
Accuracy of table reversal all traverse rates.............. .004
Independent right left hand tarry, second............ 0 to 5
Mechanical hand table traverse per revolution
of hand wheel ‑ Rapid.......................................... 15/16
-Slow....................................................... 0.2
PRIVATE Power requirements: (Electrical equipment included with machine)tc �\l 1 Powerrequirements\: (Electrical equipment included with machine)
Wheel head motor................................... 5 HP
Hydraulic pump motor............................. 1 HP
Headstock motor.................................. 1.5 HP
Internal grinding attachment motor........ 1.5 HP
Cutting fluid pump motor...................... 1/4 HP

EQUIPMENT FEATURES
Hydraulic table travel.
Coolant pump tank in base.
Net weight, including all motors......... 15,000 lbs. (approx.)
Tailstock dresser.
Flat table.
Lever operated tail stock.
L.R. Tarry.
Pick feed.
Attached electrical panel.
16” (4) Jaw chuck.
(2) Open back steady rest.
5.5”Hole through workhead.
Front table guards.

Specifications are deemed accurate, however, subject to verification or prior sale.
All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDP terms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc. dba GCH Machinery does not receive exchange/core unit back within 30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.